Product Description:
Ultra high heat resistance, moderate impact resistance.
Application of high heat resistance products such as home appliance casings, hair dryer tubes, and automotive parts.
Product Description:
Ultra high heat resistance, moderate impact resistance.
Application of high heat resistance products such as home appliance casings, hair dryer tubes, and automotive parts.
| Material Technical Data Sheet | ||||
| ABS-09 PA-777D Heat resistant grade ABS | ||||
| characteristic | Application Area | |||
| Ultra high heat resistance | Home appliance casing | |||
| Medium impact | Hair dryer cylinder | |||
| auto parts | ||||
| Application of High Heat Resistant Products | ||||
| characteristic | Testing standards | Test conditions | Unit | Typical value |
| Physical Property | ||||
| proportion | ISO 1183 | 23℃ | g/cm³ | 1.06 |
| Mold Shrinkage | ISO 294-4 | % | 0.3~0.6 | |
| Melt Index | ISO 1133 | 220℃ X10KG | ml/10 min | 5.5 |
| Mechanical Property | ||||
| Mechanical Property | Testing standards | Test conditions | Unit | Data |
| tensile strength | ISO 527 | 50mm/min | mpa | 45 |
| Elongation rate | ISO 527 | 50mm/min | % | 30 |
| bending strength | ISO 178 | 2mm/min | MPA | 73 |
| Bending elastic modulus | ISO 178 | 2mm/min | GPA | 2.3 |
| IZOG impact strength with a gap | ISO 180/1A | 23℃ | KJ/㎡ | 13 |
| IZOG impact strength with a gap | ISO 180/1A | -30 | KJ/㎡ | 7 |
| Thermal Property | ||||
| Thermal Property | Testing standards | Test conditions | Unit | Data |
| Non-burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | 97 |
| burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | 117 |
| Injection molding | ||||
| Injection molding | Unit | Data | ||
| drying temperature | ℃ | 90～105 | ||
| drying time | H | 3 | ||
| Front measuring area Temperature | ℃ | 250～230 | ||
| Mid compression zone Temperature | ℃ | 250～230 | ||
| Third section feeding zone Temperature | ℃ | 240～220 | ||
| Maximum melting temperature | ℃ | 270 | ||
| mold temperature | ℃ | 30～70 | ||
| injection speed | Medium low speed | |||
| Back pressure | 5～15 | KG/c㎡ | ||
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| UL | ASTMD495 | 0.45MPa | ℃ | 140 |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 1.5mm | UL94 | HB | ||
| Fire Rating Full Color 1.7mm | UL94 | HB | ||
| Ul | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 1.5mm | UL94 | HB | ||
| Fire Rating Full Color 1.7mm | UL94 | HB | ||
| HAI Full Color 1.5mm | UL746A | 0 | PLC | |
| HAI Full Color 1.7mm | UL746A | 0 | PLC | |
| RTI Elec Full Color 1.5mm | UL746B | 50 | ℃ | |
| RTI Elec Full Color 1.7mm | UL746B | 50 | ℃ | |
| RTI Imp Full color1.5MM | UL746B | 50 | ℃ | |
| RTI Str Full color1.5MM | UL746B | 50 | ℃ | |
| RTI Str Full color1.7MM | UL746B | 50 | ℃ | |
| Material Technical Data Sheet | ||||
| ABS-09 PA-777D Heat resistant grade ABS | ||||
| characteristic | Application Area | |||
| Ultra high heat resistance | Home appliance casing | |||
| Medium impact | Hair dryer cylinder | |||
| auto parts | ||||
| Application of High Heat Resistant Products | ||||
| characteristic | Testing standards | Test conditions | Unit | Typical value |
| Physical Property | ||||
| proportion | ISO 1183 | 23℃ | g/cm³ | 1.06 |
| Mold Shrinkage | ISO 294-4 | % | 0.3~0.6 | |
| Melt Index | ISO 1133 | 220℃ X10KG | ml/10 min | 5.5 |
| Mechanical Property | ||||
| Mechanical Property | Testing standards | Test conditions | Unit | Data |
| tensile strength | ISO 527 | 50mm/min | mpa | 45 |
| Elongation rate | ISO 527 | 50mm/min | % | 30 |
| bending strength | ISO 178 | 2mm/min | MPA | 73 |
| Bending elastic modulus | ISO 178 | 2mm/min | GPA | 2.3 |
| IZOG impact strength with a gap | ISO 180/1A | 23℃ | KJ/㎡ | 13 |
| IZOG impact strength with a gap | ISO 180/1A | -30 | KJ/㎡ | 7 |
| Thermal Property | ||||
| Thermal Property | Testing standards | Test conditions | Unit | Data |
| Non-burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | 97 |
| burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | 117 |
| Injection molding | ||||
| Injection molding | Unit | Data | ||
| drying temperature | ℃ | 90～105 | ||
| drying time | H | 3 | ||
| Front measuring area Temperature | ℃ | 250～230 | ||
| Mid compression zone Temperature | ℃ | 250～230 | ||
| Third section feeding zone Temperature | ℃ | 240～220 | ||
| Maximum melting temperature | ℃ | 270 | ||
| mold temperature | ℃ | 30～70 | ||
| injection speed | Medium low speed | |||
| Back pressure | 5～15 | KG/c㎡ | ||
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| UL | ASTMD495 | 0.45MPa | ℃ | 140 |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 1.5mm | UL94 | HB | ||
| Fire Rating Full Color 1.7mm | UL94 | HB | ||
| Ul | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 1.5mm | UL94 | HB | ||
| Fire Rating Full Color 1.7mm | UL94 | HB | ||
| HAI Full Color 1.5mm | UL746A | 0 | PLC | |
| HAI Full Color 1.7mm | UL746A | 0 | PLC | |
| RTI Elec Full Color 1.5mm | UL746B | 50 | ℃ | |
| RTI Elec Full Color 1.7mm | UL746B | 50 | ℃ | |
| RTI Imp Full color1.5MM | UL746B | 50 | ℃ | |
| RTI Str Full color1.5MM | UL746B | 50 | ℃ | |
| RTI Str Full color1.7MM | UL746B | 50 | ℃ | |
Dongguan Fengqi Import & export Co., LTD is located in the largest plastics base of Guangdong China.
Copyright © 2024 Dongguan Fengqi Import & export Co., Ltd.