PC/ABS alloy has the mechanical workability and low temperature resistance of ABS, as well as the high impact and heat resistance of PC. PC/ABS, polycarbonate and acrylonitrile butadiene styrene copolymers and mixtures, are thermoplastic plastics made from polycarbonate and ABS alloys. Can be applied to automotive components, 3C electronic product casings, consumer electronic components, household appliance casings, toys, sheet materials and other products. Its application end is diversified. Our factory has high standard production equipment and testing facilities, with the ability to develop new materials and provide processing technology services. In addition, the factory equipment also adopts strict environmental standards, has mature production processes, and has no environmental pollution concerns.
PC/ABS alloy has the mechanical workability and low temperature resistance of ABS, as well as the high impact and heat resistance of PC. PC/ABS, polycarbonate and acrylonitrile butadiene styrene copolymers and mixtures, are thermoplastic plastics made from polycarbonate and ABS alloys. Can be applied to automotive components, 3C electronic product casings, consumer electronic components, household appliance casings, toys, sheet materials and other products. Its application end is diversified. Our factory has high standard production equipment and testing facilities, with the ability to develop new materials and provide processing technology services. In addition, the factory equipment also adopts strict environmental standards, has mature production processes, and has no environmental pollution concerns.
Material Technical Data Sheet | ||||
PC&ABS 01 PC-345 | ||||
characteristic | Application Area | |||
Thermoplastic | Automotive interior and exterior decorations | |||
high-impact | Business equipment casing and built-in components | |||
Electronic product casing | ||||
Household appliances | ||||
Electrical Products | ||||
Physical Property | ||||
characteristic | Testing standards | Test conditions | Unit | Typical value |
proportion | ISO 1183 | 23℃ | g/cm³ | 1.1 |
Mold Shrinkage | ISO 294-4 | % | 0.4~0.6 | |
Melt Index | ISO 1133 | 260℃ X5KG | ml/10 min | 19 |
Mechanical Property | ||||
Mechanical Property | Testing standards | Test conditions | Unit | Data |
tensile strength | ISO 527 | 50mm/min | mpa | 50 |
Elongation rate | ISO 527 | 50mm/min | % | 105 |
bending strength | ISO 178 | 2mm/min | MPA | 75 |
Bending elastic modulus | ISO 178 | 2mm/min | GPA | 2.1 |
IZOG impact strength with a gap | ISO 180/1A | 23℃ | KJ/㎡ | 45 |
IZOG impact strength with a gap | ISO 180/1A | -30 | KJ/㎡ | 40 |
Thermal Property | ||||
Thermal Property | Testing standards | Test conditions | Unit | Data |
Non-burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | 93 |
burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | - |
Injection molding | ||||
Injection molding | Unit | Data | ||
drying temperature | ℃ | 80~100 | ||
drying time | H | 4 | ||
Temperature of nozzle section | ℃ | 260~220 | ||
Mid compression zone Temperature | ℃ | 270~230 | ||
Third section feeding zone Temperature | ℃ | 230~200 | ||
Maximum melting temperature | ℃ | 280 | ||
mold temperature | ℃ | 30~70 | ||
injection speed | Medium low speed |
Thermal Properties | ||||
Thermal Properties | Test Standard | Test Condition | Units | Data |
UL | ASTMD495 | |||
Flame Retardancy | ||||
Flame Retardancy | Test Standard | Data | ||
Fire Rating Full Color 1.5mm | UL94 | HB | ||
Fire Rating Full Color 3.0mm | UL94 | HB | ||
Ul | ||||
Flame Retardancy | Test Standard | Data | Units | |
Fire Rating Full Color 1.5mm | UL94 | HB | ||
Fire Rating Full Color 1.7mm | UL94 | HB | ||
HAI Full Color 1.5mm | UL746A | 0 | PLC | |
HAI Full Color 1.7mm | UL746A | 0 | PLC | |
RTI Elec Full Color 1.5mm | UL746B | 60 | ℃ | |
RTI Elec Full Color 1.7mm | UL746B | 60 | ℃ | |
RTI Imp Full color1.5MM | UL746B | 60 | ℃ | |
RTI Str Full color1.5MM | UL746B | 60 | ℃ | |
RTI Str Full color1.7MM | UL746B | 60 | ℃ |
Material Technical Data Sheet | ||||
PC&ABS 01 PC-345 | ||||
characteristic | Application Area | |||
Thermoplastic | Automotive interior and exterior decorations | |||
high-impact | Business equipment casing and built-in components | |||
Electronic product casing | ||||
Household appliances | ||||
Electrical Products | ||||
Physical Property | ||||
characteristic | Testing standards | Test conditions | Unit | Typical value |
proportion | ISO 1183 | 23℃ | g/cm³ | 1.1 |
Mold Shrinkage | ISO 294-4 | % | 0.4~0.6 | |
Melt Index | ISO 1133 | 260℃ X5KG | ml/10 min | 19 |
Mechanical Property | ||||
Mechanical Property | Testing standards | Test conditions | Unit | Data |
tensile strength | ISO 527 | 50mm/min | mpa | 50 |
Elongation rate | ISO 527 | 50mm/min | % | 105 |
bending strength | ISO 178 | 2mm/min | MPA | 75 |
Bending elastic modulus | ISO 178 | 2mm/min | GPA | 2.1 |
IZOG impact strength with a gap | ISO 180/1A | 23℃ | KJ/㎡ | 45 |
IZOG impact strength with a gap | ISO 180/1A | -30 | KJ/㎡ | 40 |
Thermal Property | ||||
Thermal Property | Testing standards | Test conditions | Unit | Data |
Non-burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | 93 |
burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | - |
Injection molding | ||||
Injection molding | Unit | Data | ||
drying temperature | ℃ | 80~100 | ||
drying time | H | 4 | ||
Temperature of nozzle section | ℃ | 260~220 | ||
Mid compression zone Temperature | ℃ | 270~230 | ||
Third section feeding zone Temperature | ℃ | 230~200 | ||
Maximum melting temperature | ℃ | 280 | ||
mold temperature | ℃ | 30~70 | ||
injection speed | Medium low speed |
Thermal Properties | ||||
Thermal Properties | Test Standard | Test Condition | Units | Data |
UL | ASTMD495 | |||
Flame Retardancy | ||||
Flame Retardancy | Test Standard | Data | ||
Fire Rating Full Color 1.5mm | UL94 | HB | ||
Fire Rating Full Color 3.0mm | UL94 | HB | ||
Ul | ||||
Flame Retardancy | Test Standard | Data | Units | |
Fire Rating Full Color 1.5mm | UL94 | HB | ||
Fire Rating Full Color 1.7mm | UL94 | HB | ||
HAI Full Color 1.5mm | UL746A | 0 | PLC | |
HAI Full Color 1.7mm | UL746A | 0 | PLC | |
RTI Elec Full Color 1.5mm | UL746B | 60 | ℃ | |
RTI Elec Full Color 1.7mm | UL746B | 60 | ℃ | |
RTI Imp Full color1.5MM | UL746B | 60 | ℃ | |
RTI Str Full color1.5MM | UL746B | 60 | ℃ | |
RTI Str Full color1.7MM | UL746B | 60 | ℃ |