标题

PRODUCTS

ABS Series

PC Series

PC&ABS Series

PMMA Series

MESSAGE

* Name

Tel

* Email

* Message

PC04 TW-PC-122

Polycarbonate (PC) is a non-toxic, odorless, colorless to light yellow transparent solid with a polymer chain containing carbonate groups.

Widely used:

Universal injection molding materials for pen tubes/stationery/toys/drinking water containers/thin-walled products and transparent composite molded products.

2021_UL_PC122_EN.pdf

2024_RoHS_PC-122_EN_extsigned.pdf

Polycarbonate (PC) is a non-toxic, odorless, colorless to light yellow transparent solid with a polymer chain containing carbonate groups.

Widely used:

Universal injection molding materials for pen tubes/stationery/toys/drinking water containers/thin-walled products and transparent composite molded products.

2021_UL_PC122_EN.pdf

2024_RoHS_PC-122_EN_extsigned.pdf

Material Technical Data Sheet
PC04 TW-PC-122
characteristic		Application Area
Non toxic, odorless, colorless		Stationery
Medium viscosity		toys
		Drinking water container
		Thin walled products
	application-level	Universal injection molding materials for transparent composite molded products
Physical Property
characteristic	Testing standards	Test conditions	Unit	Typical value
proportion	ISO 1183	23℃	g/cm³	1.2
Mold Shrinkage	ISO 294-4		%	0.5~0.7
Melt Index	ISO 1133	300℃ X1.2KG	ml/10 min	22

Mechanical Property
Mechanical Property	Testing standards	Test conditions	Unit	Data
tensile strength	ISO 527	50mm/min	mpa	63
Elongation rate	ISO 527	50mm/min	%	120
bending strength	ISO 178	2mm/min	MPA	90
Bending elastic modulus	ISO 178	2mm/min	GPA	2.4
IZOG impact strength with a gap	ISO 180/1A	23℃	KJ/㎡	60
IZOG impact strength with a gap	ISO 180/1A	-30	KJ/㎡	－

Thermal Property
Thermal Property	Testing standards	Test conditions	Unit	Data
Non-burning-out Heat distortion temperature	ISO 75/A	1.8MPa	℃	128
burning-out Heat distortion temperature	ISO 75/A	1.8MPa	℃	143

Injection molding
Injection molding	Unit	Data
drying temperature	℃	120
drying time	H	4
Temperature in nozzle area	℃	300～240
Mid compression zone Temperature	℃	310～240
Third section feeding zone Temperature	℃	300～220

Maximum melting temperature	℃	330
mold temperature	℃	70～120
injection speed	Medium low speed

Thermal Properties
Thermal Properties	Flame retardant rating	Test Condition	Units	Data
UL	V-2	UL-94	mm	3
Flame Retardancy
Flame Retardancy	Test Standard	Data
Flame Rating 0.38 mm to 1.60 mm	UL94	V-2
Fire Rating Full Color 3.2 mm	UL94	V-2
Ul
Hot-wire lgnition 1.6 mm	UL746	0	PLC2
Hot-wire lgnition 3.2 mm	UL746	0	PLC2
High Amp Arc lgnition 1.6 mm	UL746		PLC
High Amp Arc lgnition 3.2 mm	UL746		PLC
RTI Elec Full color 0.38 mm	UL746	80	℃
RTI Elec Full color 1.6 mm to 3.2 mm	UL746	120
RTI lmp Full color0.380 mm	UL746	80
RTI lmp Full color1.6 mm to 3.2 mm	UL746	105	℃
RTI Str 0.38 MM	UL746	80
RTI Str Full color1.6mm to 3.2 mm	UL746	120	℃

Material Technical Data Sheet
PC04 TW-PC-122
characteristic		Application Area
Non toxic, odorless, colorless		Stationery
Medium viscosity		toys
		Drinking water container
		Thin walled products
	application-level	Universal injection molding materials for transparent composite molded products
Physical Property
characteristic	Testing standards	Test conditions	Unit	Typical value
proportion	ISO 1183	23℃	g/cm³	1.2
Mold Shrinkage	ISO 294-4		%	0.5~0.7
Melt Index	ISO 1133	300℃ X1.2KG	ml/10 min	22

Mechanical Property
Mechanical Property	Testing standards	Test conditions	Unit	Data
tensile strength	ISO 527	50mm/min	mpa	63
Elongation rate	ISO 527	50mm/min	%	120
bending strength	ISO 178	2mm/min	MPA	90
Bending elastic modulus	ISO 178	2mm/min	GPA	2.4
IZOG impact strength with a gap	ISO 180/1A	23℃	KJ/㎡	60
IZOG impact strength with a gap	ISO 180/1A	-30	KJ/㎡	－

Thermal Property
Thermal Property	Testing standards	Test conditions	Unit	Data
Non-burning-out Heat distortion temperature	ISO 75/A	1.8MPa	℃	128
burning-out Heat distortion temperature	ISO 75/A	1.8MPa	℃	143

Injection molding
Injection molding	Unit	Data
drying temperature	℃	120
drying time	H	4
Temperature in nozzle area	℃	300～240
Mid compression zone Temperature	℃	310～240
Third section feeding zone Temperature	℃	300～220

Maximum melting temperature	℃	330
mold temperature	℃	70～120
injection speed	Medium low speed

Thermal Properties
Thermal Properties	Flame retardant rating	Test Condition	Units	Data
UL	V-2	UL-94	mm	3
Flame Retardancy
Flame Retardancy	Test Standard	Data
Flame Rating 0.38 mm to 1.60 mm	UL94	V-2
Fire Rating Full Color 3.2 mm	UL94	V-2
Ul
Hot-wire lgnition 1.6 mm	UL746	0	PLC2
Hot-wire lgnition 3.2 mm	UL746	0	PLC2
High Amp Arc lgnition 1.6 mm	UL746		PLC
High Amp Arc lgnition 3.2 mm	UL746		PLC
RTI Elec Full color 0.38 mm	UL746	80	℃
RTI Elec Full color 1.6 mm to 3.2 mm	UL746	120
RTI lmp Full color0.380 mm	UL746	80
RTI lmp Full color1.6 mm to 3.2 mm	UL746	105	℃
RTI Str 0.38 MM	UL746	80
RTI Str Full color1.6mm to 3.2 mm	UL746	120	℃