Flame retardant (Free of bromine and chlorine) , 1.0mm V0 electrical appliance.
Flame retardant (Free of bromine and chlorine) , 1.0mm V0 electrical appliance.
| Material Technical Data Sheet | ||||
| PC05 TW-PC-6600 | ||||
| characteristic | Application Area | |||
| 1.0mm V0 electrical appliance | ||||
| Free of bromine and chlorine | ||||
| Flame retardant | ||||
| application-level | ||||
| Physical Property | ||||
| characteristic | Testing standards | Test conditions | Unit | Typical value |
| proportion | ISO 1183 | 23℃ | g/cm³ | 1.2 |
| Mold Shrinkage | ISO 294-4 | % | 0.4~0.6 | |
| Spiral flow | ISO CHIMEI | 260℃,2MM,V:50%,P:50% | CM | |
| Melt Index | ISO 1133 | 300℃ X1.2KG | ml/10 min | 10 |
| Mechanical Property | ||||
| Mechanical Property | Testing standards | Test conditions | Unit | Data |
| tensile strength | ISO 527 | 50mm/min | mpa | 60 |
| Elongation rate | ISO 527 | 50mm/min | % | 115 |
| bending strength | ISO 178 | 2mm/min | MPA | 90 |
| Bending elastic modulus | ISO 178 | 2mm/min | GPA | 2.3 |
| IZOG impact strength with a gap | ISO 180/1A | 23℃ | KJ/㎡ | 60 |
| IZOG impact strength with a gap | ISO 180/1A | -30 | KJ/㎡ | 15 |
| Thermal Property | ||||
| Thermal Property | Testing standards | Test conditions | Unit | Data |
| Non-burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | 125 |
| burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | 140 |
| Injection molding | ||||
| Injection molding | Unit | Data | ||
| drying temperature | ℃ | 120 | ||
| drying time | H | 4 | ||
| Temperature in nozzle area | ℃ | 310～250 | ||
| Mid compression zone Temperature | ℃ | 320～250 | ||
| Third section feeding zone Temperature | ℃ | 300～230 | ||
| Maximum melting temperature | ℃ | 330 | ||
| mold temperature | ℃ | 70～120 | ||
| Thermal Properties | ||||
| Thermal Properties | Flame retardant rating | Test Condition | Units | Data |
| UL | V-0 | UL-94 | mm | 1 |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Flame Rating 1.0 mm | UL94 | V-0 | ||
| Fire Rating Full Color 1.5 mm | UL94 | V-0 | ||
| Ul | ||||
| Hot-wire lgnition 1.0 mm | UL746A | 0 | ||
| Hot-wire lgnition 1.5 mm | UL746A | 0 | ||
| High Amp Arc lgnition 1.0mm | UL746A | |||
| High Amp Arc lgnition 1.5 mm | UL746A | |||
| Test Standard | IEC 60695-2-12 | |||
| Glow Wire Flammability lndex | 1.0 mm | 930 | ℃ | |
| Glow Wire Flammability lndex | 1.5 mm to 3.0 mm | 960 | ℃ | |
| Test Standard | IEC 60695-2-13 | |||
| Glow Wire lgnition Temperature | 1.0 mm | 850 | ℃ | |
| Glow Wire lgnition Temperature | 1.5 mm to 3.0 mm | 877 | ℃ | |
| Material Technical Data Sheet | ||||
| PC05 TW-PC-6600 | ||||
| characteristic | Application Area | |||
| 1.0mm V0 electrical appliance | ||||
| Free of bromine and chlorine | ||||
| Flame retardant | ||||
| application-level | ||||
| Physical Property | ||||
| characteristic | Testing standards | Test conditions | Unit | Typical value |
| proportion | ISO 1183 | 23℃ | g/cm³ | 1.2 |
| Mold Shrinkage | ISO 294-4 | % | 0.4~0.6 | |
| Spiral flow | ISO CHIMEI | 260℃,2MM,V:50%,P:50% | CM | |
| Melt Index | ISO 1133 | 300℃ X1.2KG | ml/10 min | 10 |
| Mechanical Property | ||||
| Mechanical Property | Testing standards | Test conditions | Unit | Data |
| tensile strength | ISO 527 | 50mm/min | mpa | 60 |
| Elongation rate | ISO 527 | 50mm/min | % | 115 |
| bending strength | ISO 178 | 2mm/min | MPA | 90 |
| Bending elastic modulus | ISO 178 | 2mm/min | GPA | 2.3 |
| IZOG impact strength with a gap | ISO 180/1A | 23℃ | KJ/㎡ | 60 |
| IZOG impact strength with a gap | ISO 180/1A | -30 | KJ/㎡ | 15 |
| Thermal Property | ||||
| Thermal Property | Testing standards | Test conditions | Unit | Data |
| Non-burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | 125 |
| burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | 140 |
| Injection molding | ||||
| Injection molding | Unit | Data | ||
| drying temperature | ℃ | 120 | ||
| drying time | H | 4 | ||
| Temperature in nozzle area | ℃ | 310～250 | ||
| Mid compression zone Temperature | ℃ | 320～250 | ||
| Third section feeding zone Temperature | ℃ | 300～230 | ||
| Maximum melting temperature | ℃ | 330 | ||
| mold temperature | ℃ | 70～120 | ||
| Thermal Properties | ||||
| Thermal Properties | Flame retardant rating | Test Condition | Units | Data |
| UL | V-0 | UL-94 | mm | 1 |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Flame Rating 1.0 mm | UL94 | V-0 | ||
| Fire Rating Full Color 1.5 mm | UL94 | V-0 | ||
| Ul | ||||
| Hot-wire lgnition 1.0 mm | UL746A | 0 | ||
| Hot-wire lgnition 1.5 mm | UL746A | 0 | ||
| High Amp Arc lgnition 1.0mm | UL746A | |||
| High Amp Arc lgnition 1.5 mm | UL746A | |||
| Test Standard | IEC 60695-2-12 | |||
| Glow Wire Flammability lndex | 1.0 mm | 930 | ℃ | |
| Glow Wire Flammability lndex | 1.5 mm to 3.0 mm | 960 | ℃ | |
| Test Standard | IEC 60695-2-13 | |||
| Glow Wire lgnition Temperature | 1.0 mm | 850 | ℃ | |
| Glow Wire lgnition Temperature | 1.5 mm to 3.0 mm | 877 | ℃ | |
Prev: PC04 TW-PC-122
Next: No more
Dongguan Fengqi Import & export Co., LTD is located in the largest plastics base of Guangdong China.
Copyright © 2024 Dongguan Fengqi Import & export Co., Ltd.