Product Description:
High glossiness, ultra-high rigidity, and good tensile strength.
Suitable for phone cases/lamp holders/toys/office supplies/clock cases and home appliance buttons.
Product Description:
High glossiness, ultra-high rigidity, and good tensile strength.
Suitable for phone cases/lamp holders/toys/office supplies/clock cases and home appliance buttons.
| Material Technical Data Sheet | ||||
| ABS-05 PA-707 Injection Grade ABS | ||||
| characteristic | Application Area | |||
| High gloss | toys | |||
| Good tensile strength | Home appliance buttons | |||
| high rigidity | Telephone case | |||
| office supplies | ||||
| characteristic | Testing standards | Test conditions | Unit | Typical value |
| Physical Property | ||||
| proportion | ISO 1183 | 23℃ | g/cm³ | 1.06 |
| Mold Shrinkage | ISO 294-4 | % | 0.4~0.7 | |
| Melt Index | ISO 1133 | 220℃ X10KG | ml/10 min | 20 |
| Mechanical Property | ||||
| Mechanical Property | Testing standards | Test conditions | Unit | Data |
| tensile strength | ISO 527 | 50mm/min | mpa | 50 |
| Elongation rate | ISO 527 | 50mm/min | % | 40 |
| bending strength | ISO 178 | 2mm/min | MPA | 79 |
| Bending elastic modulus | ISO 178 | 2mm/min | GPA | 2.3 |
| IZOG impact strength with a gap | ISO 180/1A | 23℃ | KJ/㎡ | 13 |
| IZOG impact strength with a gap | ISO 180/1A | -30 | KJ/㎡ | 7 |
| Thermal Property | ||||
| Thermal Property | Testing standards | Test conditions | Unit | Data |
| Non-burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | 83 |
| burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | 98 |
| Electrical Property | ||||
| Electrical Property | Testing standards | Data | Unit | |
| Bulk Resistance | IEC 60695-11-10 | HB | Ω | |
| Insulation strength 1.5mm | IEC 60695-11-10 | HB75 | kv/mm | |
| Flame Retardancy | ||||
| Flame Retardancy | Testing standards | Data | ||
| Fire rating full-color 1.5mm | UL94 | V-2 | ||
| Fire rating full-color 3.0mm | UL94 | V-2 | ||
| Injection molding | ||||
| Injection molding | Unit | Data | ||
| drying temperature | ℃ | 80～85 | ||
| drying time | H | 2～4 | ||
| Front measuring area Temperature | ℃ | 230～190 | ||
| Mid compression zone Temperature | ℃ | 230～190 | ||
| Third section feeding zone Temperature | ℃ | 220～180 | ||
| Maximum melting temperature | ℃ | 240 | ||
| mold temperature | ℃ | 30～70 | ||
| injection speed | Medium low speed | |||
| Material Technical Data Sheet | ||||
| ABS-05 PA-707 Injection Grade ABS | ||||
| characteristic | Application Area | |||
| High gloss | toys | |||
| Good tensile strength | Home appliance buttons | |||
| high rigidity | Telephone case | |||
| office supplies | ||||
| characteristic | Testing standards | Test conditions | Unit | Typical value |
| Physical Property | ||||
| proportion | ISO 1183 | 23℃ | g/cm³ | 1.06 |
| Mold Shrinkage | ISO 294-4 | % | 0.4~0.7 | |
| Melt Index | ISO 1133 | 220℃ X10KG | ml/10 min | 20 |
| Mechanical Property | ||||
| Mechanical Property | Testing standards | Test conditions | Unit | Data |
| tensile strength | ISO 527 | 50mm/min | mpa | 50 |
| Elongation rate | ISO 527 | 50mm/min | % | 40 |
| bending strength | ISO 178 | 2mm/min | MPA | 79 |
| Bending elastic modulus | ISO 178 | 2mm/min | GPA | 2.3 |
| IZOG impact strength with a gap | ISO 180/1A | 23℃ | KJ/㎡ | 13 |
| IZOG impact strength with a gap | ISO 180/1A | -30 | KJ/㎡ | 7 |
| Thermal Property | ||||
| Thermal Property | Testing standards | Test conditions | Unit | Data |
| Non-burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | 83 |
| burning-out Heat distortion temperature | ISO 75/A | 1.8MPa | ℃ | 98 |
| Electrical Property | ||||
| Electrical Property | Testing standards | Data | Unit | |
| Bulk Resistance | IEC 60695-11-10 | HB | Ω | |
| Insulation strength 1.5mm | IEC 60695-11-10 | HB75 | kv/mm | |
| Flame Retardancy | ||||
| Flame Retardancy | Testing standards | Data | ||
| Fire rating full-color 1.5mm | UL94 | V-2 | ||
| Fire rating full-color 3.0mm | UL94 | V-2 | ||
| Injection molding | ||||
| Injection molding | Unit | Data | ||
| drying temperature | ℃ | 80～85 | ||
| drying time | H | 2～4 | ||
| Front measuring area Temperature | ℃ | 230～190 | ||
| Mid compression zone Temperature | ℃ | 230～190 | ||
| Third section feeding zone Temperature | ℃ | 220～180 | ||
| Maximum melting temperature | ℃ | 240 | ||
| mold temperature | ℃ | 30～70 | ||
| injection speed | Medium low speed | |||
Dongguan Fengqi Import & export Co., LTD is located in the largest plastics base of Guangdong China.
Copyright © 2024 Dongguan Fengqi Import & export Co., Ltd.